Intelligent Liquid Turbine Flow Meter, Stainless Steel Pipeline Flow Sensor, Digital Display for Diesel and Hydraulic Oil.

I. Introduction to Xiamen Jingchuan Co., Ltd. LRF Liquid Turbine Flow Meter

· The Xiamen Jingchuan Co., Ltd. LRF series liquid turbine flow meter is a new generation turbine flow meter that incorporates advanced technology from domestic and international flow instruments through optimized design. It features a simple and lightweight structure, high accuracy, excellent reproducibility, sensitive response, and convenient installation, maintenance, and use. It is widely used to measure liquids in closed pipelines that are non-corrosive to stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al2O3, and hard alloys, and free of fibers, particles, and other impurities, with a kinematic viscosity of less than 5×10⁻⁶ m²/s at operating temperature. For liquids with a kinematic viscosity greater than 5×10⁻⁶ m²/s, the flow meter can be used after calibration with the actual liquid. When paired with display instruments with special functions, it can also perform quantitative control and over-limit alarm functions, making it an ideal instrument for flow measurement and energy conservation.

II. Product Features of Xiamen Jingchuan Co., Ltd. LRF Liquid Turbine Flow Meter

· High accuracy, generally up to ±1%R, ±0.5%R, with high-precision models reaching ±0.2%R;

· Excellent repeatability, with short-term repeatability up to 0.05%–0.2%. Due to its good repeatability, it can achieve extremely high accuracy with frequent calibration or online calibration, making it the preferred flow meter for trade settlement;

· Outputs pulse frequency signals, suitable for total measurement and computer connectivity, with no zero drift and strong anti-interference capability;

· Capable of generating high-frequency signals (3–4 kHz) with strong signal resolution;

· Wide rangeability, with medium to large diameters reaching 1:20 and small diameters 1:10;

· Compact and lightweight structure, easy installation and maintenance, and high flow capacity;

· Suitable for high-pressure measurement, with no need to drill holes in the meter body, making it easy to manufacture high-pressure models;

· A variety of specialized sensor types available, which can be designed according to specific user needs, such as low-temperature type, bidirectional type, downhole type, sand-mixing specialized type, etc. Can be made as insertion type, suitable for large-diameter measurement, with low pressure loss, low cost, and the ability to be extracted without interrupting flow, ensuring convenient installation and maintenance.